ENME201-20S1 (C) Semester One 2020

Design Communication

15 points

Details:
Start Date: Monday, 17 February 2020
End Date: Sunday, 21 June 2020
Withdrawal Dates
Last Day to withdraw from this course:
  • Without financial penalty (full fee refund): Friday, 28 February 2020
  • Without academic penalty (including no fee refund): Friday, 29 May 2020

Description

Drawing, design and geometry of engineering components.

The course introduces drawing standards, develops freehand sketching and visualization skills, and provides a basic understanding of engineering components, their graphical representation and correct detail form design. The course seeks to make students aware of the design decision making process and methods for systematic design concept selection.

Learning Outcomes

o  An understanding of design and the design process.

o  An understanding of mechanical engineering components and how those components combine to carry structural loads, transmit motion and energy and work effectively as an assembly.

o  Engineering sketching and drawing skills.

o  Visualisation skills to handle 3-D thinking tasks, projections and sectional views which the designer needs to visually describe a design.

o  Skills in concept generation.

o  An appreciation of methods for systematic design concept selection.

University Graduate Attributes

This course will provide students with an opportunity to develop the Graduate Attributes specified below:

Critically competent in a core academic discipline of their award

Students know and can critically evaluate and, where applicable, apply this knowledge to topics/issues within their majoring subject.

Prerequisites

Subject to the approval of the Dean of Engineering and Forestry. PROD110 Introduction to Product Design is accepted as an alternative to ENGR101 Foundations of Engineering.

Course Coordinator / Lecturer

John Pearse

Lecturer

Don Clucas

Assessment

Assessment Due Date Percentage  Description
Development Assignment 01 May 2020 6%
Assignment 1 2.5%
Drawing task 54% 6 x 9% = 54% (due 21 April, 28 April, 5 May, 12 May, 19 May and 26 May)
Homework 12.5% 5 x 2.5% homeworks
Warman design report 13 Mar 2020 10%
Design and Build Competition 20 May 2020 15%

Textbooks / Resources

Required Texts

Standards Association of Australia. , Standards New Zealand; Technical drawing for students : joint handbook ; Revised and designated as joint handbook SAA/SNZ HB1:1994; Standards Australia ;Standards New Zealand, 1994.

Recommended Reading

Boundy, A W; Engineering Drawing ; 8th Edition; Newnes, 2009.

Simmons, C. H. , Maguire, D. E., Phelps, Neil, IEng MIED; Manual of engineering drawing ; 3rd ed. ; Newnes, 2009.

Additional Course Outline Information

Academic integrity

Harassment
* Harassment of any sort will not be tolerated.  Each UC student is here to learn and to experience a friendly and supportive community.
* It is every student's right to expect: respect and courtesy from staff and other students, including freedom from harassment of any sort; fair treatment; the ability to speak out about any issues that concern them, without fear of consequences for their safety and well-being.
* Furthermore, each student has the responsibility to: respect the rights and property of others; attend to their own health and safety, and that of others; and behave in a manner towards each other that does not reflect badly on the student body or the University.
* If you, or someone you know, has experienced harassment, please talk to your lecturers, directors of study, or head of department.


Dishonest Practice
* Plagiarism, collusion, copying, and ghost writing are unacceptable and dishonest practices.
* Plagiarism is the presentation of any material (test, data, figures or drawings, on any medium including computer files) from any other source without clear and adequate acknowledgment of the source.
* Collusion is the presentation of work performed in conjunction with another person or persons, but submitted as if it has been completed only by the named author(s).
* Copying is the use of material (in any medium, including computer files) produced by another person(s) with or without their knowledge and approval.
* Ghost writing is the use of another person(s) (with or without payment) to prepare all or part of an item submitted for assessment.

Do not engage in dishonest practices. The Department reserves the right to refer dishonest practices to the University Proctor and where appropriate to not mark the work.
The University regulations on academic integrity and dishonest practice can be found here.

Indicative Fees

Domestic fee $975.00

International fee $5,500.00

* All fees are inclusive of NZ GST or any equivalent overseas tax, and do not include any programme level discount or additional course-related expenses.

For further information see Mechanical Engineering .

All ENME201 Occurrences

  • ENME201-20S1 (C) Semester One 2020