ENCH391-18S2 (C) Semester Two 2018

Process Systems and Control

15 points
16 Jul 2018 - 18 Nov 2018

Description

An introduction to process dynamics and process control technology.

Topics
• Dynamic process modelling
• Process dynamic elements such as resistive, capacitive, first-order, oscillatory and dead-time elements
• Behaviour of systems of dynamic elements using MATLAB and Excel
• Control hardware including controllers, sensors and valves
• Basic feedback control concepts and the Proportional-Integral-Derivative controller
• Closed loop stability and empirical tuning of controllers
• Cascade, ratio and feed-forward control
• Control of unit operations

The course will be taught both via a real-time approach involving the hands on use of dynamic simulation and building on classical process dynamics knowledge developed in earlier years. (The course does not use the classical Laplace Transform approach).

Learning Outcomes

  • To ensure that all students and graduates fully understand the need to name, date and clearly document all files, spreadsheets and computer programs.
  • To understand the dynamics elements that affect the dynamics of a process such as first-order response, dead time, and capacity.
  • To be able to simulate using Excel and Matlab, the dynamics response of systems made up of typical dynamic elements.
  • To become familiar with some typical items of control hardware that are used in industry.
  • To understand PID control well enough to be able to simulate and tune a real process.
  • To be able to simulate more complex control including cascade, ratio and feed forward.
  • To know which control loops might be suitable for a range of unit operations.
    • University Graduate Attributes

      This course will provide students with an opportunity to develop the Graduate Attributes specified below:

      Critically competent in a core academic discipline of their award

      Students know and can critically evaluate and, where applicable, apply this knowledge to topics/issues within their majoring subject.

Pre-requisites

ENCH298 (from 2016)

Timetable 2018

Students must attend one activity from each section.

Lecture A
Activity Day Time Location Weeks
01 Thursday 13:00 - 14:00 F3 Lecture Theatre 16 Jul - 26 Aug
10 Sep - 21 Oct
Lecture B
Activity Day Time Location Weeks
01 Wednesday 13:00 - 14:00 A6 Lecture Theatre 16 Jul - 26 Aug
10 Sep - 21 Oct
Lecture C
Activity Day Time Location Weeks
01 Tuesday 12:00 - 13:00 A4 Lecture Theatre 16 Jul - 26 Aug
10 Sep - 21 Oct
Lab A
Activity Day Time Location Weeks
01 Monday 16:00 - 18:00 CAPE 112 13 Aug - 19 Aug
02 Tuesday 10:00 - 12:00 CAPE 112 13 Aug - 19 Aug
03 Wednesday 15:00 - 17:00 CAPE 112 13 Aug - 19 Aug
04 Thursday 11:00 - 13:00 CAPE 112 13 Aug - 19 Aug
05 Thursday 16:00 - 18:00 CAPE 112 13 Aug - 19 Aug
06 Monday 14:00 - 16:00 CAPE 112 20 Aug - 26 Aug
07 Monday 16:00 - 18:00 CAPE 112 20 Aug - 26 Aug
08 Tuesday 10:00 - 12:00 CAPE 112 20 Aug - 26 Aug
09 Tuesday 14:00 - 16:00 CAPE 112 20 Aug - 26 Aug
10 Tuesday 16:00 - 18:00 CAPE 112 20 Aug - 26 Aug
11 Wednesday 08:00 - 10:00 CAPE 112 20 Aug - 26 Aug
12 Wednesday 11:00 - 13:00 CAPE 112 20 Aug - 26 Aug
13 Wednesday 15:00 - 17:00 CAPE 112 20 Aug - 26 Aug
14 Thursday 11:00 - 13:00 CAPE 112 20 Aug - 26 Aug
Lab B
Activity Day Time Location Weeks
01 Wednesday 14:00 - 15:00 CAPE 112 17 Sep - 23 Sep
02 Wednesday 15:00 - 16:00 CAPE 112 17 Sep - 23 Sep
03 Wednesday 16:00 - 17:00 CAPE 112 17 Sep - 23 Sep
04 Thursday 11:00 - 12:00 CAPE 112 17 Sep - 23 Sep
05 Thursday 12:00 - 13:00 CAPE 112 17 Sep - 23 Sep
06 Thursday 15:00 - 16:00 CAPE 112 17 Sep - 23 Sep
07 Thursday 16:00 - 17:00 CAPE 112 17 Sep - 23 Sep
08 Monday 14:00 - 15:00 CAPE 112 24 Sep - 30 Sep
09 Monday 15:00 - 16:00 CAPE 112 24 Sep - 30 Sep
10 Monday 16:00 - 17:00 CAPE 112 24 Sep - 30 Sep
11 Tuesday 10:00 - 11:00 CAPE 112 24 Sep - 30 Sep
12 Tuesday 11:00 - 12:00 CAPE 112 24 Sep - 30 Sep
13 Friday 14:00 - 15:00 CAPE 112 17 Sep - 23 Sep
14 Friday 15:00 - 16:00 CAPE 112 17 Sep - 23 Sep
15 Friday 16:00 - 17:00 CAPE 112 17 Sep - 23 Sep

Examination and Formal Tests

Test A
Activity Day Time Location Weeks
01 Tuesday 18:30 - 19:30 Jack Erskine 038 Lab 4 17 Sep - 23 Sep
02 Tuesday 18:30 - 19:30 Jack Erskine 035 Lab 2 17 Sep - 23 Sep
03 Tuesday 18:30 - 19:30 Jack Erskine 033 Lab 1 17 Sep - 23 Sep

Course Coordinator / Lecturer

Ken Morison

Assessment

Assessment Due Date Percentage  Description
Computer Exam 29%
Written Exam 29%
Tuning lab completion 2%
Assignment 1 10 Aug 2018 6% Dynamic systems with Matlab
Process Design Lab 12 Sep 2018 8% Weeks 5 & 6
Assignment 2 with Computer Test 18 Sep 2018 10% Erskine 33, 35, 38
Assignment 3 03 Oct 2018 8%
Assignment 4 19 Oct 2018 8%


ASSESSMENT
The computer exam might require you to use Excel, Word and Matlab in an examination environment.  You will need to know how to use these, how to save files, and how to upload these files into Learn. Inability in more than one of these may lead to failure. The test on 18 Sept will be conducted in the same way as the computer exam to enable you to get familiar with the system.

Some of the assignments will be done in pairs.  You may not choose to work with the same person twice (with the exception of the process dynamics lab which can be done with the same person as assignment 1).

LABORATORIES
Process dynamics Lab, held in weeks 5-6 (13-24 August 2018).  You will carry out experiments to determine the dynamics of the Spirax Sarco plate heat exchanger. Given that this is the first year we have used this equipment, your role will partly be as commissioning engineers.

Controller tuning lab, held in weeks 8-9 (17 Sept – 28 Sept).  In this short lab you get to change and test controller tuning on the heat exchanger.

Textbooks / Resources

Recommended Reading

Svrcek, William Y. , Mahoney, Donald P., Young, Brent R; A real-time approach to process control; Third edition; Wiley, 2014.

Notes

Concerns
Students with concerns about the course should contact the Course Coordinator, the 2nd Pro Director of Studies, or the Head of Department.

General Policies of the Department
Students may obtain the general policies of the University from the website. For example:

Special considerations: http://www.canterbury.ac.nz/study/special-consideration/  

Academic Appeals of Assessments: Students with concerns about assessment processes or grades should be advised to speak first with the relevant lecturer. If the matter cannot be resolved, then the student should meet and discuss the matter with the Head of Department/School and thereafter follow the procedures outlined in the University procedures http://www.canterbury.ac.nz/media/documents/postgraduate-/Academic-Appeals-Grievances-Principles-Procedures.pdf  and regulations http://www.canterbury.ac.nz/regulations/general-regulations/academic-appeals-and-grievance-regulations/

Reconsideration of grades: If you are concerned that your final grade may be incorrect it is suggested (for CAPE) that you make an informal query to the course coordinator, but you may follow the official procedures: http://www.canterbury.ac.nz/study/examinations/result-dates-and-appeals/

Disabilities: http://www.canterbury.ac.nz/disability/

Pre-requisite: ENCH298

Indicative Fees

Domestic fee $937.00

International fee $5,125.00

* Fees include New Zealand GST and do not include any programme level discount or additional course related expenses.

For further information see Chemical and Process Engineering.

All ENCH391 Occurrences

  • ENCH391-18S2 (C) Semester Two 2018